Laboratoire de l'Informatique et du Parallélisme » Pobyso

def slz_compute_polynomial_and_interval(functionSo, degreeSo, lowerBoundSa, 

                                        upperBoundSa, approxPrecSa, 

                                        sollyaPrecSa=None):

    """

    Under the assumptions listed for slz_get_intervals_and_polynomials, compute

    a polynomial that approximates the function on a an interval starting

    at lowerBoundSa and finishing at a value that guarantees that the polynomial

    approximates with the expected precision.

    The interval upper bound is lowered until the expected approximation 

    precision is reached.

    The polynomial, the bounds, the center of the interval and the error

    are returned.

    """

    RRR = lowerBoundSa.parent()

    #goldenRatioSa = RRR(5.sqrt() / 2 - 1/2)

    #intervalShrinkConstFactorSa = goldenRatioSa

    intervalShrinkConstFactorSa = RRR('0.5')

    absoluteErrorTypeSo = pobyso_absolute_so_so()

    currentRangeSo = pobyso_bounds_to_range_sa_so(lowerBoundSa, upperBoundSa)

    currentUpperBoundSa = upperBoundSa

    currentLowerBoundSa = lowerBoundSa

    # What we want here is the polynomial without the variable change, 

    # since our actual variable will be x-intervalCenter defined over the 

    # domain [lowerBound-intervalCenter , upperBound-intervalCenter]. 

    (polySo, intervalCenterSo, maxErrorSo) = \

        pobyso_taylor_expansion_no_change_var_so_so(functionSo, degreeSo, 

                                                    currentRangeSo, 

                                                    absoluteErrorTypeSo)

    maxErrorSa = pobyso_get_constant_as_rn_with_rf_so_sa(maxErrorSo)

    while maxErrorSa > approxPrecSa:

        sollya_lib_clear_obj(maxErrorSo)

        errorRatioSa = 1/(maxErrorSa/approxPrecSa).log2()

        #print "Error ratio: ", errorRatioSa

        if errorRatioSa > intervalShrinkConstFactorSa:

            currentUpperBoundSa = currentLowerBoundSa + \

                                  (currentUpperBoundSa - currentLowerBoundSa) * \

                                   intervalShrinkConstFactorSa

        else:

            currentUpperBoundSa = currentLowerBoundSa + \

                                  (currentUpperBoundSa - currentLowerBoundSa) * \

                                  intervalShrinkConstFactorSa

            currentUpperBoundSa = currentLowerBoundSa + \

                                  (currentUpperBoundSa - currentLowerBoundSa) * \

                                  errorRatioSa

        #print "Current upper bound:", currentUpperBoundSa

        sollya_lib_clear_obj(currentRangeSo)

        sollya_lib_clear_obj(polySo)

        currentRangeSo = pobyso_bounds_to_range_sa_so(currentLowerBoundSa, 

                                                      currentUpperBoundSa)

        (polySo, intervalCenterSo, maxErrorSo) = \

            pobyso_taylor_expansion_no_change_var_so_so(functionSo, degreeSo, 

                                                        currentRangeSo, 

                                                        absoluteErrorTypeSo)

        #maxErrorSa = pobyso_get_constant_as_rn_with_rf_so_sa(maxErrorSo, RRR)

        maxErrorSa = pobyso_get_constant_as_rn_with_rf_so_sa(maxErrorSo)

    sollya_lib_clear_obj(absoluteErrorTypeSo)

    return((polySo, currentRangeSo, intervalCenterSo, maxErrorSo))

    # End slz_compute_polynomial_and_interval

def slz_compute_scaled_function(functionSa, \

                                      variableNameSa, \

                                      lowerBoundSa, \

                                      upperBoundSa, \

                                      floatingPointPrecSa):

    """

    From a function, compute the scaled function whose domain

    is included in [1, 2) and whose image is also included in [1,2).

    Return a tuple: 

    [0]: the scaled function

    [1]: the scaled domain lower bound

    [2]: the scaled domain upper bound

    [3]: the scaled image lower bound

    [4]: the scaled image upper bound

    """

    x = var(variableNameSa)

    # Scalling the domain -> [1,2[.

    boundsIntervalRifSa = RealIntervalField(floatingPointPrecSa)

    domainBoundsIntervalSa = boundsIntervalRifSa(lowerBoundSa, upperBoundSa)

    (domainScalingExpressionSa, invDomainScalingExpressionSa) = \

        slz_interval_scaling_expression(domainBoundsIntervalSa, variableNameSa)

    print "domainScalingExpression for argument :", domainScalingExpressionSa

    print "f: ", f

    ff = f.subs({x : domainScalingExpressionSa})

    #ff = f.subs_expr(x==domainScalingExpressionSa)

    scaledLowerBoundSa = invDomainScalingExpressionSa(lowerBoundSa).n()

    scaledUpperBoundSa = invDomainScalingExpressionSa(upperBoundSa).n()

    print 'ff:', ff, "- Domain:", scaledLowerBoundSa, scaledUpperBoundSa

    #

    # Scalling the image -> [1,2[.

    flbSa = f(lowerBoundSa).n()

    fubSa = f(upperBoundSa).n()

    if flbSa <= fubSa: # Increasing

        imageBinadeBottomSa = floor(flbSa.log2())

    else: # Decreasing

        imageBinadeBottomSa = floor(fubSa.log2())

    print 'ff:', ff, '- Image:', flbSa, fubSa, imageBinadeBottomSa

    imageBoundsIntervalSa = boundsIntervalRifSa(flbSa, fubSa)

    (imageScalingExpressionSa, invImageScalingExpressionSa) = \

        slz_interval_scaling_expression(imageBoundsIntervalSa, variableNameSa)

    iis = invImageScalingExpressionSa.function(x)

    fff = iis.subs({x:ff})

    print "fff:", fff,

    print " - Image:", fff(scaledLowerBoundSa), fff(scaledUpperBoundSa)

    return([fff, scaledLowerBoundSa, scaledUpperBoundSa, \

            fff(scaledLowerBoundSa), fff(scaledUpperBoundSa)])

def slz_get_intervals_and_polynomials(functionSa, variableNameSa, degreeSa, 

                                      lowerBoundSa, 

                                      upperBoundSa, floatingPointPrecSa, 

                                      internalSollyaPrecSa, approxPrecSa):

    """

    Under the assumption that:

    - functionSa is monotonic on the [lowerBoundSa, upperBoundSa] interval;

    - lowerBound and upperBound belong to the same binade.

    from a:

    - function;

    - a degree

    - a pair of bounds;

    - the floating-point precision we work on;

    - the internal Sollya precision;

    - the requested approximation error

    The initial interval is, possibly, splitted into smaller intervals.

    It return a list of tuples, each made of:

    - a first polynomial (without the changed variable f(x) = p(x-x0));

    - a second polynomila (with a changed variable f(x) = q(x))

    - the approximation interval;

    - the center, x0, of the interval;

    - the corresponding approximation error.

    """

    x = var(variableNameSa)

    # Scalling the domain -> [1,2[.

    boundsIntervalRifSa = RealIntervalField(floatingPointPrecSa)

    domainBoundsIntervalSa = boundsIntervalRifSa(lowerBoundSa, upperBoundSa)

    (domainScalingExpressionSa, invDomainScalingExpressionSa) = \

        slz_interval_scaling_expression(domainBoundsIntervalSa, variableNameSa)

    print "domainScalingExpression for argument :", domainScalingExpressionSa

    print "f: ", f

    ff = f.subs({x : domainScalingExpressionSa})

    #ff = f.subs_expr(x==domainScalingExpressionSa)

    scaledLowerBoundSa = invDomainScalingExpressionSa(lowerBoundSa).n()

    scaledUpperBoundSa = invDomainScalingExpressionSa(upperBoundSa).n()

    print 'ff:', ff, "- Domain:", scaledLowerBoundSa, scaledUpperBoundSa

    #

    # Scalling the image -> [1,2[.

    flbSa = f(lowerBoundSa).n()

    fubSa = f(upperBoundSa).n()

    if flbSa <= fubSa: # Increasing

        imageBinadeBottomSa = floor(flbSa.log2())

    else: # Decreasing

        imageBinadeBottomSa = floor(fubSa.log2())

    print 'ff:', ff, '- Image:', flbSa, fubSa, imageBinadeBottomSa

    imageBoundsIntervalSa = boundsIntervalRifSa(flbSa, fubSa)

    (imageScalingExpressionSa, invImageScalingExpressionSa) = \

        slz_interval_scaling_expression(imageBoundsIntervalSa, variableNameSa)

    iis = invImageScalingExpressionSa.function(x)

    fff = iis.subs({x:ff})

    print "fff:", fff,

    print " - Image:", fff(scaledLowerBoundSa), fff(scaledUpperBoundSa)

    #

    resultArray = []

    #

    print "Approximation precision: ", RR(approxPrecSa)

    # Prepare the arguments for the Taylor expansion computation with Sollya.

    functionSo = pobyso_parse_string_sa_so(fff._assume_str())

    degreeSo = pobyso_constant_from_int_sa_so(degreeSa)

    scaledBoundsSo = pobyso_bounds_to_range_sa_so(scaledLowerBoundSa, 

                                                  scaledUpperBoundSa)

    # Compute the first Taylor expansion.

    (polySo, boundsSo, intervalCenterSo, maxErrorSo) = \

        slz_compute_polynomial_and_interval(functionSo, degreeSo,

                                        scaledLowerBoundSa, scaledUpperBoundSa,

                                        approxPrecSa, internalSollyaPrecSa)

    # Change variable stuff

    changeVarExpressionSo = sollya_lib_build_function_sub(

                              sollya_lib_build_function_free_variable(), 

                              sollya_lib_copy_obj(intervalCenterSo))

    polyVarChangedSo = sollya_lib_evaluate(polySo, changeVarExpressionSo) 

    resultArray.append((polySo, polyVarChangedSo, boundsSo, intervalCenterSo,\

                         maxErrorSo))

    realIntervalField = RealIntervalField(max(lowerBoundSa.parent().precision(),

                                              upperBoundSa.parent().precision()))

    boundsSa = pobyso_range_to_interval_so_sa(boundsSo, realIntervalField)

    # Compute the other expansions.

    while boundsSa.endpoints()[1] < scaledUpperBoundSa:

        currentScaledLowerBoundSa = boundsSa.endpoints()[1]

        (polySo, boundsSo, intervalCenterSo, maxErrorSo) = \

            slz_compute_polynomial_and_interval(functionSo, degreeSo,

                                            currentScaledLowerBoundSa, 

                                            scaledUpperBoundSa, approxPrecSa, 

                                            internalSollyaPrecSa)

        # Change variable stuff

        changeVarExpressionSo = sollya_lib_build_function_sub(

                                  sollya_lib_build_function_free_variable(), 

                                  sollya_lib_copy_obj(intervalCenterSo))

        polyVarChangedSo = sollya_lib_evaluate(polySo, changeVarExpressionSo) 

        resultArray.append((polySo, polyVarChangedSo, boundsSo, \

                            intervalCenterSo, maxErrorSo))

        boundsSa = pobyso_range_to_interval_so_sa(boundsSo, realIntervalField)

    sollya_lib_clear_obj(functionSo)

    sollya_lib_clear_obj(degreeSo)

    sollya_lib_clear_obj(scaledBoundsSo)

    return(resultArray)

    # End slz_get_intervals_and_polynomials

def slz_interval_scaling_expression(boundsInterval, varName):

    """

    Compute the scaling expression to map an interval that span only

    a binade to [1, 2) and the inverse expression as well.

    Not very sure that the transformation makes sense for negative numbers.

    """

    # The scaling offset is only used for negative numbers.

    if abs(boundsInterval.endpoints()[0]) < 1:

        if boundsInterval.endpoints()[0] >= 0:

            scalingCoeff = 2^floor(boundsInterval.endpoints()[0].log2())

            invScalingCoeff = 1/scalingCoeff

            return((scalingCoeff * eval(varName), 

                    invScalingCoeff * eval(varName)))

        else:

            scalingCoeff = \

                2^(floor((-boundsInterval.endpoints()[0]).log2()) - 1)

            scalingOffset = -3 * scalingCoeff

            return((scalingCoeff * eval(varName) + scalingOffset,

                    1/scalingCoeff * eval(varName) + 3))

    else: 

        if boundsInterval.endpoints()[0] >= 0:

            scalingCoeff = 2^floor(boundsInterval.endpoints()[0].log2())

            scalingOffset = 0

            return((scalingCoeff * eval(varName), 

                    1/scalingCoeff * eval(varName)))

        else:

            scalingCoeff = \

                2^(floor((-boundsInterval.endpoints()[1]).log2()))

            scalingOffset =  -3 * scalingCoeff

            #scalingOffset = 0

            return((scalingCoeff * eval(varName) + scalingOffset,

                    1/scalingCoeff * eval(varName) + 3))

def slz_polynomial_and_interval_to_sage(polyRangeCenterErrorSo):

    """

    Compute the Sage version of the Taylor polynomial and it's

    companion data (interval, center...)

    The input parameter is a five elements tuple:

    - [0]: the polyomial (without variable change);

    - [1]: the polyomial (with variable change done in Sollya);

    - [2]: the interval (as Sollya range);

    - [3]: the interval center;

    - [4]: the approximation error. 

    The function return a 5 elements tuple: formed with all the 

    input elements converted into their Sollya counterpart.

    """

    polynomialSa = pobyso_get_poly_so_sa(polyRangeCenterErrorSo[0])

    polynomialChangedVarSa = pobyso_get_poly_so_sa(polyRangeCenterErrorSo[1])

    intervalSa = \

            pobyso_get_interval_from_range_so_sa(polyRangeCenterErrorSo[2])

    centerSa = \

            pobyso_get_constant_as_rn_with_rf_so_sa(polyRangeCenterErrorSo[3])

    errorSa = \

            pobyso_get_constant_as_rn_with_rf_so_sa(polyRangeCenterErrorSo[4])

    return((polynomialSa, polynomialChangedVarSa, intervalSa, centerSa, errorSa))

    # End slz_polynomial_and_interval_to_sage

print "sageSLZ loaded..."